How to Install a Vacuum Breaker on a Shampoo Bowl

Installing a vacuum breaker on a shampoo bowl is an important safety precaution to take. A vacuum breaker prevents water from being siphoned back into the water supply, which could contaminate the water and create a health hazard. This article has discussed how to install a vacuum breaker on a shampoo bowl.

What is a shampoo bowl vacuum breaker?

A shampoo bowl vacuum breaker is a device that helps to prevent the spread of infection by breaking the suction created when water and hair are expelled from a shampoo bowl. This device is especially important in settings where multiple people will be using the same shampoo bowl, such as in a hair salon.

Kinds of Vacuum Breaker Shampoo Bowls:

There are a few different types of shampoo bowl vacuum breakers available, so it’s important to choose the right one for your business.

• One type of shampoo bowl vacuum breaker is a diaphragm-type valve. This type uses a rubber diaphragm to seal the opening and prevent contaminants from entering the system. It’s easy to install and can be used with most types of shampoo bowls.
• Another option is a ball-type valve. This type features a ball that seals off the opening when it’s in the closed position. It’s also easy to install and can be used with most types of shampoo bowls, but it doesn’t have as tight of a seal as the diaphragm-type valve.
• The third option is an air-gap style vacuum breaker, which features two valves that open up when water pressure reaches 60 psi or more. This type is less common than other options, but it does provide superior protection against contamination.

What Is Different Between Inline and Top Mount Breakers?

There are a few key differences between inline and top mount breakers. Inline breakers are mounted in the panel box, while top mount breakers are mounted on the load center or service entrance panel. Top mount breakers provide more breaker space and easier access to the wiring terminals. They’re also UL listed for use as service entrance equipment.

How Much Does It Cost to Install a Vacuum Breaker on a Shampoo Bowl?

A vacuum breaker is a plumbing device that helps to prevent backflow. Backflow can cause contamination of the water supply, and it can also create a hazardous situation if harmful chemicals are present in the water.

The cost of installing a vacuum breaker on a shampoo bowl will vary depending on the type of vacuum breaker you choose, as well as the size and complexity of your installation. Generally, though, you can expect to pay between $50 and $200 for this type of work.

How to Install a Vacuum Breaker on a Shampoo Bowl?

Installing a vacuum breaker on your shampoo bowl is an important safety precaution that every salon should take. A vacuum breaker helps prevent the backflow of water and contaminants into the city water supply. If you are not sure how to install one, here is a simple guide:

1. Shut off the water supply to the shampoo bowl at the main shut-off valve.
2. Disconnect the hose from the faucet spout and remove any washers or screens from the inside of it.
3. Thread the Vacuum Breaker onto the faucet spout, making sure that it is tight against the washers or screens.
4. Connect hose back onto Vacuum Breaker and tighten securely.
5. Turn on the water supply at the main shut-off valve.
6. Check for leaks around connections and tighten if necessary.

Final Verdict

From the above discussion, we can conclude that installing a vacuum breaker on a shampoo bowl is an important safety precaution that all salon professionals should take. So the salon professional should install it properly by following every step of the article’s bowl installation guide. Thank you for reading the article.

FAQs